Touch Screen Operator Interface
10.4″ Allen-Bradley Panelview.
Displays the baler’s current status and indicates bale percentage complete with graphic progress bar.
Allows selection of saved material settings controlling bale length, photo eye options, etc.
Dual motor models when equipped, allow the operator to select either motor/pump A or B to operate, or allow automatic on demand activation of second motor.
Displays and stores machine faults, E-stop status and allows service personnel to display a fault message history log.
Optional conveyor controls allow operator to select upper or lower photo eye activation, run, jog, stop, conveyor auto stop delay and more.
- Password protection allows operators to access run time features while blocking
Feed Opening – Width 27.5″ Feed Opening – Length 30″ or 40″ Feed Opening – Depth 40″ Main Cylinder 7″ Operating Pressure 4200 PSI Ram Force 161,635 lbs Baling Force 134.7 PSI Horsepower Options Single 20/30, Twin 20/30 No Load Cycle Time 7.7 secs to 16 secs No Load Displacement Up to 18,700 cf/hr Bale Size 30 x 40 x Variable Length Typical Bale Density OCC up to – 30#/cf
A160 Model Includes:
Oil Cooling: Closed loop air oil cooler w/ independent circulation pump PLC: Allen-Bradley Micrologix HMI: 10.4″ Allen-Bradley Panelview Floor Liners: AR400 replaceable floor liners Optional: Full tank of oil shipped with baler Bale wire run out sensor additional 5′ or 10′ Heavy Duty Bale Slide can be added